PT 
EN 
The Pop 20 is a cheap and easy to build cruising sailboat capable of performing coastal sailing. This is an entry size boat for a larger number of weekend sailors that dream of owning a pocket cruiser adequate for family leisure.
The successful career of this project is due mainly to its performance. She is fun to be sailed because when she heels, instead of pointing into the wind and tending to broach, as most of the other boats of approximately the same size use to do, she accelerates promptly, keeping the rudder light to be steered. She is also a good performer when sailing in light winds, since she is a light-displacement hull with low wetted surface. She is also quite efficient when sailing close-hauled, her limitation being her modest water-line length.
Dados Técnicos
Comprimento total
6.20 m (20′ 4″)
Comprimento da linha d'água
5.20 m (17′ 7″)
Boca Máxima
2.20 m (7′ 2″)
Calado
1.30 m (4′ 3″)
Lastro
330 kg (727 lb)
Deslocamento
960 kg (2114 lb)
Área Vélica
18 m2 (192 sq. feet)
Método Construtivo
Plywood/epoxy
Lista de Planos
Pop20 – S1 – Lines Plan
Pop20 – S2 – Mast and Sails
Pop20 – S3 – Interior Layout
Pop20 – S4 – Deck Layout
Pop20 – S5a – Structural Plan
Pop20 – S6 – Cross Section At Stations
Pop20 – S7 – Station 0 – Full Size Pattern
Pop20 – S8 – Station 1.5- Full Size Pattern
Pop20 – S9A – Station 3 – Full Size Pattern
Pop20 – S9B – Station 3 – Full Size Pattern
Pop20 – S10A – Station 4 – Full Size Pattern
Pop20 – S10B – Station 4 – Full Size Pattern
Pop20 – S11A – Station 5 – Full Size Pattern
Pop20 – S11B – Station 5 – Full Size Pattern
Pop20 – S12A – Station 6 – Full Size Pattern
Pop20 – S12B – Station 6 – Full Size Pattern
Pop20 – S13A – Station 7 – Full Size Pattern
Pop20 – S13B – Station 7 – Full Size Pattern
Pop20 – S14A – Station 9 – Full Size Pattern
Pop20 – S14B – Station 9 – Full Size Pattern
Pop20 – S15 – Transom – Full Size Pattern
Pop20 – S16A – Stem – Full Size Pattern A
Pop20 – S16B – Stem – Full Size Pattern B
Pop20 – S17 – Hatch Details And Custom Fittings
Pop20 – S18A – Fin Keel Model – Full Size Pattern A
Pop20 – S18B – Fin Keel Model – Full Size Pattern B
Pop20- S19A- Box Keel A
Pop20- S19B- Box Keel B
Pop20- S19C- Box Keel C
Descrição Técnica
The internal layout is reason for praise, considering the boat is only a twenty-footer.
There is a double berth forward, with a chemical toilet underneath, separated from the aft side of the interior by a structural bulkhead, which is also the mast support. Behind this bulkhead are placed two counters, the starboard one with an alcohol one burner stove and bins for galley utensils and provisions. At the other side`s counter is placed the galley`s sink. The sink flange is recessed in the counter flat top, allowing to be covered by a lid when not in use. The same applies to the water sprout, that also can be removed and covered by a disc lid. When doing this, the counter can be used as navigation table. Navigation instruments are attached to the structural bulkhead aft face.
Two very comfortable quarter berths, their fore half also performing the role of being the cabin settees, complete the basic inside layout.
A portable cooler box placed just under the companionway hatch also serves as step for entering the cabin.
The flush deck makes the Pop 20 extremely easy to be sheathed with plywood, besides giving the boat a very appealing streamlined racing-like silhouette.
The deck is cambered from the forepeak to the companionway hatch. From there aft, until reaching the transom, there are five flat plywood panels: the pair of cockpit seats, the cockpit vertical walls and the cockpit floor.
Whilst sailing, this pocket cruiser shows many virtues. It’s almost neutral helm, allied to good sailing lines, explain well the quick acceleration when the wind increases. The good responsiveness of the rudder and her relatively shallow draught are an invitation to explore gunk-holes. And if she ever gets aground, in most cases all it is required to do to get her back into deeper water is moving the crew weight to leeward using the boom as grab-rail, so to decrease draught.
A boat like this was a gap in our list of stock plans, and once we decided that the work would go ahead, our main goal was to make this design as if it was a kit on digital format, and for that matter, printable in A0 sheets, so that the amateur builder had no way to make measurement mistakes, a practical approach for a “do it yourself” boat. We did the utmost in every single detail of its construction to find the simplest solution imaginable for making the assemblage as easy as assembling as flat pack furniture from the Swedish shops.
The resulting design, the Pop 20 is our easiest fin-keel sailboat to build. Its cost and number of working hours for the construction are hard to be beaten by any other cabin cruiser sailboat of approximately the same size. To crown our effort, the resulting design is a fast, responsive and easy to be steered sailboat.
Fotos e Imagens
Outros Planos
